- Embedded system for
TACAN ground equipment console (mini-monitor, keyboard, recorder): Firmware
development for Z80 microprocessor.
- Multiprocessor embedded
system for tank doppler radar: Firmware development with DSP 56000 for
radar images processing.
- Test and calibration
system for on board avionic equipment (TACAN, DME, DMP), based on PC equipped
with ARINC 429 card: System design, device driver and DOS application development.
- Operator console
for management of ground based navaids equipment (TACAN, DME,
DMP, VOR, ILS), based on PC units connected via RS-232: DOS applications
development.
- Transportable
system for field test of ILS systems on the airstrip, based on industrial
PC and data acquisition card: System design, device driver and DOS application
development.
- Distributed
remote control system for monitoring and controlling of navaids equipment,
based on multiple units (STD-BUS racks and PC) connected by various methods
(RS-232, dedicated lines, radio links, telephone switched links): System design,
software and firmware development.
- Multiprocessor
embedded system for combat aircraft multimode doppler radar : Firmware
development with DSP 96000 and 56000 for radar image processing.
- High speed data
transmission (90 Mb/s) and real-time DSP processing of radar images towards
a tape recorder, consisting of two cards. The first one captures and
transmits the data and the second one receives and process (DSP 56001) the
stream towards the tape recorder: System design, hardware and software development.
- Remote control
system and development of a suite of reactors for molecular synthesis without
gravity through local net: application development for control console
equipped with Windows NT 4.0, and control unit emulator equipped with VxWorks
and TCP/IP on VME/SPARC and MIL 1553 bus.
- Multiprocessor embedded
system for the base station (BSC) of a GSM cellular network based on INTEL
386 and 486: Development of operating system modules and device handlers for
peripheral units.
- Operation and
Maintenance interface between network elements of GSM system, based on
object oriented model conforming to ISO and CCITT recommendations: Interface
specification and development of related modules on BSC unit.
- Multiprocessor
board for GSM system traffic channel transcoding and rate adaptation:
Firmware development with INTEL 80186 for fault detection and card management.
- Multiprocessor
embedded system for the TRAU unit of a GSM system, based on INTEL 80186
and 80188: Development of operating system modules and device handlers for
peripheral units.
- Simulator of
GSM BSS stations consisting of client-server TCP/IP application with MOTIF
graphical user interface, based on UNIX workstations and MULTIBUS II multiprocessor
line server , with OSI and proprietary protocols: System specification and
integration, software development.
- E1/T1 Line serverfor
project development and system test of GSM and telephony equipment consisting
of industrial PC with cards for line interface, switch matrix and HDLC channels
and QNX operating system: Product specification and integration, software
development of device drivers, communication protocols (LAPD and MTP), server
software, client applications for VMS, SCO UNIX, Sun OS, SVR4 and QNX.
- Bus adapter
for stand-alone testing of peripheral card of GSM equipment.It consists
of a special hardware adapter and a PC equipped with i/o cards, QNX operating
system, device drivers and application software: System design, hardware and
software development.
- Multiprocessor
DSP card for DTMF recognition and ADPCM compression of speech channels.
It consists of a PC card equipped with 8 DSP TMS 320C548/9 and related device
drivers for SCO Unix. Hardware and software development.
- Equipment for
rate adaption between AAL1 and AAL2 ATM connections for the UMTS system:
software development for the DPS mutiprocessor control unit on Intel 386 equipped
with real time proprietary system.
- Communication
sub-system for Gb interface of the GPRS system with pSOS on PowerPC Motorola
860: BSP adaptation, multi-HDLC device driver realization, application development
(Frame Relay and Network Services).
- Radio unit remote
connection to BTS equipment with MDSL, for GSM system: Firmware design
and development on Motorola 68302 and CAN bus.
- Control equipment
and optical amplifier for optical fibre communication networks: hardware
and firmware design and development for Intel 80196, Atmel AVR and Motorola
683xx processors.
- Supervision
system for optical fibre communication network, communication with peers
thought TCP/IP and proprietary protocols: application design and Visual Basic
development.
- PC driven tactile
sensor for anthropomorphic robots: Design of control electronics, development
of device driver and DOS application.
- Data acquisition
system for acoustic emission of metal processing at the machine tools:
sensor interfacing, data acquisition and output of statistical results.
- Quality control
equipment for antibiotics with temperature acquisition on cavies, experiment
automation, database management, based on custom electronics for data acquisition
and industrial PC: System design, device driver and DOS application development
with Netware.
- Laboratory polygraph
on PC: data acquisition and elaboration application development for Windows
operating system.
- Control system
for sheet thickness in paper production plants based on two communicating
units consisting of STD-BUS racks connected to host process controller, graphic
presentation on industrial console: System design and firmware development
with INTEL 80188.
- Automation of
reel store for the paper industry with automatic bar-code labelling ,
based on multiple PC, LAN and portable terminals with optical readers: System
design, development of device driver and DOS applications with Netware.
- BIOS for industrial
PC with custom extensions for silicon disks with EPROM, FLASH and battery
backed RAM banks: Firmware development.
- PC compatible
industrial keyboard : Hardware design and firmware development with 8051.
- Soldering/Desoldering
station for electronic laboratories, fuzzy logic temperature control :
Hardware design and firmware development with 8051.
- Remote control
and data collection system for road traffic monitoring equipment , connected
by modem : System design, DOS application development.
- Control of Sony
BVU and BETACAM videotape recorders, acquisition and recording of images
at gauge one and stereoscopic projections, based on PC with AT&T Vista
card and RS-422 interface: Device driver and DOS applications development.
- Management of
spectrophotometer and HPLC connected to PC through serial lines or GPIB
bus: Device drivers, DOS and Windows applications development.
- Network for
centralized management and program storage of numerical control machine tools
connected through multiport current loop lines: System design, device driver
and DOS application development.
- Supervisory
system for Accuray process controllers used in paper production, based
on PC connected through current loop interface: System design and DOS application
development.
- Data acquisition
system for ashes filtering control in a power plant, based on PC with
remote electronics for signal acquisition and conditioning: System design
and DOS application development.
- Video image
processing system for remote surveillance , acquisition, compression and
data transmission: Development of custom algorithms derived from JPEG, firmware
implementation with DSP 56000.
- Supervisor and
TCP/IP communication server for real-time images acquisitionand compression,
based on PC with dedicated cards, connected to MicroVAX and Alpha hosts: Protocol
and multitasking DOS application development.
- Control system
for paint blending machine, based on distributed multiprocessor electronics
with 8051 and remote PC supervisor with graphical user interface: Hardware
design, firmware and Windows application development.
- Monitoring and
control system for measuring system based on an X-ray tube , self-diagnosis
functions, calibration and linearization of the sensor, based on INTEL 80188:
Hardware design and firmware development.
- Portable microfilm
viewer with LCD display and stepper motor for road map display: Hardware
design and firmware development.
- Battery powered
micro-computer for probability calculation and optimization of the football
pools, based on 8051: Hardware design and firmware development, produced over
20000 pieces.
- Graphical digital
stereophonic equalizer for broadcasting facility based on DSP 56000: Hardware
design and firmware development.
- IR barrier with
microprocessor control driving a hydraulic valve, very low power consumption,
based on PIC: Hardware design and firmware development.
- TV set for Hotels,
with integrated FM radio, clock and enhanced security, OSD and dedicated
management functions, with Toshiba 870 µController: Firmware development.
- TV set for Hotels
with interface for a control module and network connection, clock, Pay
TV and management functions, with Toshiba 870 µController: Specification,
Firmware design and development, design of test environment.
- Control module
for Hotel TV, complete control and management of TV set via serial connection,
selective access to TV features, based on 8051: Hardware and firmware design
and development, development of PC control program.
- Intelligent
phone with a touch screen interface and, hands free function, answering
machine, fax, e-mail, remote upgrade through Internet. Software design and
development for Linux operating system and production engineering.
- Electric oven
for domestic use: Firmware design and development for programming module
and user interface for a suite of three products.
Contact us: info@prisma-eng.it
|
